4.
Using Switch Web GUI & SANit
After you have connected all your ExaSAN components, powered the system on, and
used a web browser in a computer, which is in the same network, we will first need to
perform some basic configuration and setup before the ExaSAN SAN environment is
fully operational.
Note
The default IP of eth0 is 192.168.0.25 and eth1 is 192.168.1.25.
Please type the default IP in your browser and then you'll see the screen as following
Function
1
Switch Web GUI
2
SANit FS Web GUI
4.1 ExaSAN switch web GUI
4.1.1 Entering ExaSAN switch web GUI
Please move the console arrow on "ExaSAN Switch Configuration" and then click it.
User Guide
Figure 39: Web GUI "Main screen"
Description
To configure SWF16
To Configure SANit in the SWF16
4. How to Use
Page 4-1