Table of Contents
Advertisement
Step 1: Choosing RAID level. You can choose R5 or R6 in the menu.
Step 2: Choosing SAN Software. This option means what SAN software you want to use.
Currently, SWF16 only supports "SANit" so you needn't click the option.
Step 3: Click "Next" button in the bottom right to process. If you see a screenshot shown
as Figure 47, it indicates the SW16 is connected to 4 ExaSAN A12S2-PS systems.
If Figure 48 is the result, it means that the SWF16 did not detect any connected
ExaSAN storage.
User Guide
Figure 45: Choosing RAID Level – R5
Figure 46: Choosing SAN software – SANit
4. How to Use
Page 4-5
Advertisement
Table of Contents
