Configuring The Network - "Network; Eth0 - Public Port (For Management By Rj45); Eth1 - San Private Port (For Heartbeat Communication By Rj45) - Accusys ExaSAN SWF16 User Manual

4.4.1 Configuring the network – "Network"
Users can use "NIC" option to choose "eth0" or "eth1" and then setup the parameters.
We strongly recommend using eth0 as public network for communicating with other
computer, which is not in the ExaSAN SAN environment and eth1 as private network for
ExaSAN SAN environment.
4.4.1.1 eth0 – Public port (for management by RJ45)
Users can find the following info or setup the parameters in the page
 Disable "eth1": Checking the box in front of "Disable eth1" to disable eth1 port.
 MAC address: User can find the MAC address of eth0 in the page
 Assignment method: To setup or change the IP of eth0. The default IP address is
IP address

Network Mask

Gateway

DNS server

4.4.1.2 eth1 – SAN private port (for heartbeat communication by RJ45)
Users can find the following info or setup the parameters in the page
 Disable "eth1": Checking the box in front of "Disable eth1" to disable eth1 port.
 MAC address: User can find the MAC address of eth1 in the page
 Assignment method: To setup or change the IP of eth0. The default IP address is
IP address

Network Mask

User Guide
"192.168.0.25".
Figure 54: "eth0" setting
"192.168.1.25".
4. How to Use
Page 4-10