1.4.1.3 Mirror device Indicators
Table of LED Status
Status indicator
Green
Green
Red
Flash (Red/Green)
Note:
A beeper will sound to indicate status. A slow beep indicates data rebuilding. A
fast beeping sound will indicate an error or disk failure. See below:
Sound of beeping
bi—bi—bi—bi...and so on
bi-bi-bi---bi-bi-bi... and so on
User Guide
Figure 11: front view of mirror device
Access indicator
Off
On/flash (Yellow)
Off
On/flash (Yellow)
Bi~~
Disk status
Disk is properly installed
Disk is being accessed
No disk installed or disk failure
Disk is rebuilding
System Status
System boot up and ready
MetaData rebuilding
One SSD has failed
1. Introduction
Page 1-11