Table of Contents
Advertisement
User cannot change the default user name but password. If you forget
your changed password, you could push the reset button in back of
the SWF16 for 13 seconds to go back the default setting. Please refer to
the section 1.4.1.4 for more detailed info.
Caution:
If you push reset hold but are not disconnected from the clients, you
may damage your important data in the SAN volumes.
4.1.3 Configuration menu - Overview
The following Figure is shown the three main functions,
Quick Setup
Event Management
System management
User Guide
Figure 42: Enter user name and password
4. How to Use
Page 4-3
Advertisement
Table of Contents
