Page 1
The RAID box also provides the backup disk for time setting to backup RAID1 disk to prevent the system data fails , the ACD-763xx RAID box support system interface for traditional IDE (ACD-76300) (Also known as P-ATA) and SCSI (ACD-76301) and SATA(ACD-76302)
Page 2
Disk backup function description The extra advantage of ACD-76300/301/302 is disk backup function. ACD-76300/301/302 offer third disk except the pair of RAID 1 group for full disk back-up automatically or manually, and it is schedulable by Windows-base GUI program through its built-in RTC (Real-Time Clock).the schedule can be set as per month, per week or day as user desired.
Page 3
ACCUDUAL Front view of ACD-76300/76301 RAID box: The LED indicators that are built in right-side of drive tray for indicating hard drive status. Please refer to below table for all status in details. When hearing the beeper sounds “bi-bi-bi”, please check the indicator status and react to the event immediately.
Page 4
DC Power input connector ACD-76302: Standard SATA interface ACD-76302 Rearview SATA DC power input connector SATA host connector Fan vent RS232 connector and GPIO (RS232 port for 9/11/13 pin ) DC power input connector ACD-76300/ACD-76301/ACD-76302 RAID BOX...
Page 5
The StorConn program provided by CD with RAID box package, the below steps will guide you to install the program. Double click the Setup.exe file to start to install StorConn. The Welcome dialog box will appear. Click Next to continue with the setup. ACD-76300/ACD-76301/ACD-76302 RAID BOX...
Page 6
1. Connecting power cable to RAID box. 2. Connecting 3-pin RS-232 cable to the terminal on the J10 of RAID box as Figure below. 3. Power on the RAID box | Pin1 to A | Pin2 to B | Pin3 to C | ACD-76300/ACD-76301/ACD-76302 RAID BOX...
Page 7
Note StorConn can obtain RAID system information through the RS232 (COM port) connection. The program always checks first for the IDE connection, then the RS232 connection. If both connections are present, COM port is used. ACD-76300/ACD-76301/ACD-76302 RAID BOX...
Page 8
The StorConn server icon appears on the task bar at the bottom right of the desktop. You can single click right bottom for option menu. Select Schedule Setting to pop the backup schedule setting dialog. follow the instructions next chapter to configure schedule. ACD-76300/ACD-76301/ACD-76302 RAID BOX...
Page 9
Month/02:00 in Jan. 1 means that disk backup will be perform in Feb. 1 2:00AM 2 Week →Day of week →Time: for example: if setting Week/Mon/02:00, means that disk backup will be performed every Monday 2:00AM ACD-76300/ACD-76301/ACD-76302 RAID BOX...
Page 10
6. After completed the setting click on tag Update to finish configuration and click on tag Done to quit the dialog. Installation of RAID box Caution Turn off and disconnect all electrical power from the system before beginning installation. ACD-76300/ACD-76301/ACD-76302 RAID BOX...
Page 11
If you intend to configure the device to other setting, please remove and change the cap according the instruction figure. Mount or Remove hard drive Install hard drive into disk tray and secure the hard drive by screws from the bottom. ACD-76300/ACD-76301/ACD-76302 RAID BOX...
Page 12
ACCUDUAL Install ACD-76300/301 into system Follow the following instructions to establish the connection. 1. After RAID box is fully configured. 2. Power down your host computer. 3. Mount the RAID box into the system. 4. Connecting the SCSI/IDE cable from system computer to RAID box.