1.4.1.3 SW16 Rear Panel
No.
Name
1
Cooling fan
2
Debug port
eth0 Ethernet port
3
(Management Port)
eth1 Ethernet port
4
(
SAN Private Port)
User Guide
Figure 10: SW16 back view
Description
Maintains "SW16", the switch away from
overheating.
Connects to maintenance equipment.
This port is only for testing or debugging in
Accusys internally.
Controls web GUI of the SW16 through
this port.
The default IP is "192.168.0.25"
•
The port support DNS function but
•
we don't recommend using DNS
function here.
When the network connection is
•
normal, the left LED would stay on
orange light and the right LED
would be flashing on green light.
Setups as a private port for MDC
The default IP is "192.168.1.25"
•
The port doesn't support DNS
•
function.
When the network connection is
•
1. Introduction
Page 1-11