Import License; Get Official License For More Clients - Accusys ExaSAN SWF16 User Manual

Active SANit
Step 1: Import license. See section 4.6.1
Step 2: SAN Volume Create (Quick Wizard). See section 4.6.2
Step 3: Add SAN Client IP in SANit (SWF16 side). See section 4.6.4
Step 4: Add Clients (Client side Install & Set up). See section 4.6.5

4.6.1 Import License

After installing SANit software, you will then need to activate the software. To activate
SANit software, you must decide if you want a trial version or an official version and you
need to obtain a Signature File. Please follow the steps below:
Note
The default package of SWF16 includes 6 SANit client licenses. If
users need to active more than 6 licenses, please refer to the
section 4.6.1.2.

4.6.1.1 Get Official License for more clients

When you received the SWF16 from your vendor, it should include the official license for
6 clients. If you need to extent more clients supported, please provide the serial number
of the SWF16 to your vendor. We will come out a official license to fit the serial number
of the SWF16. If you cannot find out the serial number of the SWF16, please refer to the
following steps to upgrade more clients supported feature.
"Get signature file" or "write down the serial number of the SWF16"
•
"Return the signature file or serial number to your vendor",
•
"Received official license from your vendor",
•
"Import the license to the SWF16.
•
"Restart the SWF16 and active it"
•
User Guide
Figure 77: login SANit FS
4. How to Use
Page 4-21