Common Sms Commands; Real-Time Location Query - A00; Setting Authorized Phone Numbers - A71; Setting The Smart Sleep Mode - A73 - MeiTrack T366L User Manual

MEITRACK T366L User Guide

6.5 Common SMS Commands

6.5.1 Real-Time Location Query – A00
SMS sending: 0000,A00
SMS reply: Now,Date and time,Positioning status,GSM signal strength,Speed, Remaining battery power,Map link
Description: This command is used to query tracker's current location.
Example:
Sending: 0000,A00
Reply: Now,160721 16:40,V,12,56Km/h,97%,http://maps.meigps.com/?lat=22.513015&lng=114.057235
6.5.2 Setting Authorized Phone Numbers – A71
SMS sending: 0000,A71,Phone number 1,Phone number 2,Phone number 3
SMS reply: IMEI,A71,OK
Description:
Phone number: A phone number has a maximum of 16 bytes. If no phone numbers are set, leave them blank.
Phone numbers are empty by default.
Phone number 1/2/3: Set these phone numbers to authorized phone numbers. When you call the tracker by using
these phone numbers, you will receive SMS notification about the location, geo-fence alert and low power alert
and SMS notification or a call about the unauthorized door open and unauthorized ignition.
If you need to delete all authorized phone numbers, send 0000,A71.
Example:
Sending: 0000,A71,13811111111,13822222222,13833333333
Reply: 353358017784062,A71,OK
6.5.3 Setting the Smart Sleep Mode – A73
SMS sending: 0000,A73,Sleep level
SMS reply: IMEI,A73,OK
Description:
When the sleep level is 0, the sleep mode is disabled (default).
Copyright © 2020 Meitrack Group All rights reserved. - 14 -