2 Product Overview The T355 is a magnet GPS tracker developed by Meitrack Group and newly released in 2015. It is mainly used to track goods, valuables, equipment, and other assets. Two internal magnets make the tracker attached to the vehicle body and free of installation. If the tracker drops, a drop alarm will be generated.
This section describes how to query the current location of the T355, ensuring that the GPS is working normally. Call the SIM card phone number that is used in the T355, and hang up after the dial tone rings 2-3 times.
MEITRACK T355 User Guide Note: The default password of the tracker is 0000. The password can be changed by using Meitrack Manager or SMS commands. After the password is changed successfully by using an SMS command, only the authorized phone number can receive SMS reports.
SIM card phone number. Configure by Meitrack Manager: Connect the tracker to a PC, and run Meitrack Manager to enter the main interface. Then select GPRS Tracking, and set parameters including Server IP, Port, APN, Turn on TCP, and Time Interval.
MEITRACK T355 User Guide Select a user, and Click Add a New Device. Obtain the tracker IMEI from the packing or Meitrack Manager, register a device, and set the parameters shown in the following figure. Double-click a device in the panel on the right, and check whether data is updated in Status.
Incompatible accessories may cause serious injuries or damages to your device. Handle the battery and charger carefully. Use batteries specified by Meitrack and chargers exclusively designed for your device. Incompatible batteries and chargers may cause serious injuries or damages to your device. ...
Need help?
Do you have a question about the t355 and is the answer not in the manual?
Questions and answers