Turning Off Trim Lines; Setting Default Roll Paper Margins - Epson Stylus Pro 7000 Printer Manual

2-12 | Handling Paper

Turning Off Trim Lines

Trim lines are printed on the right edge of your images or pages (if you're
using Auto Cut) or on the right and bottom edge (if you're not using Auto
Cut). You can turn off this feature if you don't want to have trim lines
printed. Follow these steps:
1. Press the
SelecType
the display.
2. Press the button until
Item
3. Press the button.
+
4. Press the button to save the new setting.
Enter
5. Press the
SelecType
You can also turn off trim lines through your print options. See Chapter 3 or
4 (or the RIP Station 5100 User Guide) for more information.

Setting Default Roll Paper Margins

The default margins for roll paper are .12 inch or 3 mm (left and right) and
.59 inch or 15 mm (top and bottom). You can set all margins to 3 mm
or 15 mm. However, print quality may be affected near the cut edges if you
change the top and bottom margins to 3 mm.
Follow these steps change the margins:
1. Press the
SelecType
the display.
2. Press the button repeatedly until
Item
appears on the display. This is the default setting.
Press the button once to set all margins to 3 mm.
• +
ROLL MARG=3MM
Press the button again to set all margins to 15 mm.
• +
ROLL MARG=15MM
You can use the
+
2-12
button.
PRINTER SETTING MENU
PAGE LINE=ON
appears on the display.
PAGE LINE=OFF
button to exit the Printer Setting menu.
button.
PRINTER SETTING MENU
ROLL MARG=T/B15MM*
appears on the display.
appears on the display.
or button to cycle through all three settings.
–
appears on
appears on the display.
appears on