Epson Stylus Pro 7000 Printer Manual page 122

7-12 | Resolving Problems
Caution
If the print head is not
left in the home position,
print quality may decline.
3. Open the roll paper cover and rewind the paper using the paper stop on
the right. Carefully pull down the jammed paper.
4. When
TURN PWR OFF AND ON
close the lower cover, if necessary, then press the
the printer off. Press it again to turn the printer back on.
5. Make sure the
Paper Out
the control panel. Then reload your paper.
When you're not printing on roll paper, make sure you secure the roll
with the roll paper belt. See page 2-7 for more information.
6. If you're not going to continue printing, make sure the print head is in
the home (far right) position, as shown below. If it's not, turn the
printer on, wait until the print head moves to the home position, then
turn off the printer.
7-12
is displayed on the control panel,
light is on and
LOAD PAPER
button to turn
Power
is displayed on
print
head