Pausing And Resetting The Printer; Monitoring Normal Printer Operation - Epson Stylus Pro 7000 Printer Manual

5-2 | Monitoring the Printer
In addition to checking the status of various components, you can use the
™
SelecType menus on the printer's control panel to configure printer
settings and perform maintenance operations. See the Appendix for more
information.

Pausing and Resetting the Printer

If you need to stop the printer during a print job, press the
Press the button again to resume printing.
Pause
If you decide to cancel a job after the printer has started processing it, you
can reset the printer. Press the
This clears all data in the printer's memory.

Monitoring Normal Printer Operation

Messages appear on the control panel display and lights come on or flash to
indicate various phases of printer operation. The following table explains the
status messages and lights:
Status messages
Message
Light
READY Operate light on
PRINTING Operate light flashing Printer is receiving data.
INK DRY Pause light flashing
<number> MIN
INK CHARGING Operate and Pause
<number> % light flashing
TRANSPORT PREP Operate light flashing Printer is draining the ink to
<number> %
RESET All lights flash briefly
PRESS PAUSE Pause light on
BUTTON
WAIT Pause light on or
flashing
PAUSE Pause light on
5-2
button and hold it down for 3 seconds.
Pause
Explanation or response
Printer is ready to print.
Printer is paused to let ink dry.
Wait for the number of minutes
shown.
Printer is charging the ink delivery
system.
prepare for transport.
Printer is resetting.
Press the Pause button to
continue.
Printer is warming up, initializing
or charging ink.
Printer is paused. To resume
printing, press the Pause button.
button.
Pause