Replacing Ink Cartridges - Epson Stylus Pro 7000 Printer Manual

Caution
For best results, use
genuine EPSON
cartridges and do not
refill them. Damage to
your printer attributable
to the use of other
consumables is not
covered by EPSON's
warranty. Color accuracy
may vary considerably if
you use non-EPSON inks.
Caution
Leave the empty
cartridge in the printer
until you are ready to
replace it.
Maintaining and Transporting the Printer

Replacing Ink Cartridges

When one of the
Ink Out
the control panel), the corresponding cartridge is almost out of ink. Make
sure you have a replacement cartridge. When the light stays on and
is displayed, the cartridge is empty. You must replace the cartridge
OUT
before you can continue printing.
Use the following EPSON ink cartridges:
Black T460011
•
Cyan T463011
•
Magenta T462011
•
Before you start, make sure the printer is on. Then follow these steps to
replace an ink cartridge:
1. Note the color of the
cartridge that you need to replace.
2. Open the ink compartment cover.
6-7
lights is flashing (and
Light cyan
•
Light magenta T464011
•
Yellow
•
light that is on or flashing. This is the
Ink Out
is displayed on
INK LOW
INK
T465011
T461011
| 6-7