Epson Stylus Pro 7000 Printer Manual page 44

2-10 | Handling Paper
Caution
To avoid damaging the
printer, never move the
paper set lever while the
Operate or Pause light is
flashing.
6. Holding the bottom edge of the paper, turn the roll back to remove the
slack. Then align the paper with the two rows of holes.
7. Pull the paper set lever all the way up, then close the roll paper cover.
PRESS PAUSE BUTTON
If you're using Auto Cut and the edge of the paper is uneven, press
to recut the edge.
Cut/Eject
8. Press the button. The print head moves and the paper feeds into
Pause
printing position automatically.
display. (Even if you don't press
into printing position automatically after 10 seconds.)
2-10
appears on the control panel display.
appears on the control panel
READY
, the paper and printer will move
Pause