Epson Stylus Pro 7000 Printer Manual page 76

4-8 | Printing with EPSON Drivers for Windows
Note
Color Controls are most
effective with RGB files.
The available print quality settings may be limited by the
setting. Choose lower print quality for faster printing, or
for best quality.
1440dpi
5. Choose any of the following:
• Super MicroWeave
The
MicroWeave
unwanted banding effects. These settings are automatically selected
for all media types except plain paper.
• High Speed
For fast, bidirectional printing at lower quality. If vertical lines in
your printout are misaligned when you use the
you may need to turn it off or align the print head (as described on
page 6-3).
• Flip Horizontal
For printing a mirror image of your file. Use with backlight film.
6. Choose one of the following Color Management configurations:
• Color Controls
This configuration lets you specify individual values for adjusting
brightness, contrast, saturation, and CMY inks, or choose from the
three Color Adjustment modes, as shown in the table on page 4-9.
You can also choose from three gamma settings, which control
image contrast by modifying the midtones and midlevel grays.
When you print on EPSON backlight film, choose
+10 Saturation
• PhotoEnhance4
When you choose this configuration, you see a sample image that
reflects the settings you choose. See page 4-9 for a description of the
available settings.
• No Color Adjustment
This setting disables color management in the printer driver.
Choose this mode if you want to use a standalone color
management module.
4-8
and
Super MicroWeave
.
Media Type
Superfine -
settings eliminate
setting,
High Speed
mode and
Vivid