Aligning The Print Head From The Control Panel - Epson Stylus Pro 7000 Printer Manual

Maintaining and Transporting the Printer
6. Select the row you chose in step 5 for each pattern (for example, row 4),
then click
Finish.
If the set with the smallest gap is unclear and can't be selected, click the
button and repeat from step 5.
Realignment

Aligning the Print Head from the Control Panel

If you are using the RIP Station 5100 or a third party driver and you don't
have the EPSON printer driver installed, you can align the print head using
the control panel.
First you print a series of alignment or adjustment patterns.
•
Then you determine which numbered row of patterns has the best
•
vertical alignment (smallest gaps). You enter the information on the
control panel to change the print head alignment.
Follow these steps to align the print head using the control panel:
1. Load roll paper in the printer, following the instructions on page 2-7.
2. Press the
SelecType
displayed.
3. Press the button.
Item
If you're using EPSON paper, leave this setting on
6-5
button until
HEAD ALIGNMENT MENU
PAPER THICK=STD
|
is
appears on the display.
.
STD
6-5