Installing The Software And Setting Up Printer Sharing; On A Macintosh; Checking System Requirements; Installing The Software - Epson Stylus Pro 7000 Printer Manual

Connecting Your Printer and Installing Drivers
Installing the Software and Setting Up Printer
Sharing on a Macintosh
You need to install the drivers and utilities on any Macintosh that will print
to the EPSON Stylus Pro 7000. Make sure each Macintosh meets the
minimum system requirements. Then follow the procedure for installing the
software. Depending on your network configuration, you may also want to
set up printer sharing.

Checking System Requirements

The memory requirements listed in the following table are for printing a
×
23 33-inch full-page color image. Requirements may vary, depending on
the size, complexity, and resolution of your images.
System requirements
Component Minimum
Processor PowerPC
OS System 8.5.1
Available 14MB (foreground printing)
memory 23MB (background printing)
Hard drive 10MB free for installing the
space software
CD-ROM Double-speed CD-ROM drive

Installing the Software

Before you start, turn off all virus protection programs. See your anti-virus
software documentation for instructions. Then follow these steps to install
the printer software:
1. Insert the printer software CD-ROM.
2. Open the
Installer
instructions on the screen.
3. When you see the "installation complete" message, click
4. After you restart, make sure you open the Chooser and select the printer.
1-7
Recommended
300 MHz G3 or higher processor
System 9 recommended for
best USB support
128MB (total)
2GB recommended
Quad-speed or faster
folder and double-click the icon. Then follow the
| 1-7
Restart.