Parallel Interface; Usb Interface; Supported Connections - Epson Stylus Pro 10000 Product Information

Interfaces

Parallel interface

The built-in parallel interface supports compatibility and ECP
modes.
Compatibility mode
Forward channel
Data format 8-bit parallel, IEEE-1284 compatibility
mode
Synchronization
STROBE
Handshake and
BUSY
timing
Signal level TTL compatible
Connector 57-30360 Amphenol connector or
equivalent
Reverse channel
Transmission IEEE-1284 Nibble mode
mode
Adaptable 57-30360 Amphenol connector or
connector equivalent
Synchronization Refer to the IEEE-1284 specification
Handshaking Refer to the IEEE-1284 specification
Signal level IEEE-1284 Level 1 device
Data Refer to the IEEE-1284 specification
transmission
timing
pulse
signals
ACKNLG
ECP mode
Transmission IEEE-1284 ECP mode
mode
Adaptable 57-30360 Amphenol connector or
connector equivalent
Synchronization Refer to the IEEE-1284 specification
Handshaking Refer to the IEEE-1284 specification
Signal level IEEE-1284 Level 1 device
Data Refer to the IEEE-1284 specification
transmission
timing

USB interface

Standard Based on Universal Serial Bus Specifications
Revision 1.1, Universal Serial Bus Device
Class Definition for Printing Devices
Version 1.1
Bit rate Approximately 12M bps (full speed device)
Data encoding NRZI
Connector USB Series B
Recommended 6 feet
cable length

Supported Connections

Parallel
System (standard)
Win 95 X
Win 98 X
Win Me X
Win NT X
Win 2000 X
®
Mac OS 8.51
Mac OS 8.6
Mac OS 9.x
* Supported on pre-installed operating systems, not upgraded from
earlier versions of Windows
5/01
EPSON Stylus Pro 10000
USB IEEE 1394 Ethernet
(standard) (standard) (optional)
X
X* X
X* X X
X
X* X X
X X
X X X
X X X
®
.
EPSON Stylus Pro 10000 - 3
®