Download  Print this page

Replacing The Waste Ink System; Related Documentation - Epson Stylus Pro 10000 Product Information

Epson stylus pro 10000: product information
Hide thumbs

Advertisement

Table of Contents

Replacing the Waste Ink System

About every two years of normal usage (25% duty cycle) or
after 12,000 B1-size prints, you must have your authorized
EPSON servicer replace the waste ink system. This is
necessary to prevent damage to the print head and maintain
print quality. Parts and labor for this service are not covered
under the terms of the limited warranty.
You can monitor the status of the waste ink system using the
control panel or by checking the Ink Pad number displayed on
the nozzle check print.
The printer displays the following message on the control
panel when the waste ink system is almost full:
MAINTENANCE REQ. 0100
You should call to schedule service at this point. When the
waste ink system is at full capacity, the printer stops and
displays the following message:
SERVICE REQ. 00000100

Related Documentation

CPD-12208
EPSON Stylus Pro 10000 Printer Guide
CPD-12209
EPSON Stylus Pro 10000 Quick
Reference Guide
4013586-00 C01 EPSON Stylus Pro 100000/10000CF
Unpacking and Assembly Guide
TM-SP10000
EPSON Stylus Pro 10000 Service Manual
PL-SP10000
EPSON Stylus Pro 10000 Parts Price List
5/01
EPSON Stylus Pro 10000
EPSON Stylus Pro 10000 - 15

Advertisement

Table of Contents
loading

  Related Manuals for Epson Stylus Pro 10000