EPSON Stylus Pro 10000
Following is a list of the items displayed. All parts on the list
except the ink cartridges and paper cutter need to be
replaced by an authorized EPSON service center.
4. Press the
button to exit the Printer Status
Replacing an Ink Cartridge
When one of the
lights is flashing (and
displayed on the control panel), the corresponding cartridge is
almost out of ink. Make sure you have a replacement
cartridge. When the light stays on and
the cartridge is empty. You must replace the cartridge before
you can continue printing.
You must use the EPSON ink cartridges designed for your printer.
Other ink cartridges will not work and may cause damage not
covered by your warranty. If you don't use the cartridges designed for
your model, you will see an error message.
10 - EPSON Stylus Pro 10000
Use only the following EPSON ink cartridges:
EPSON Stylus Pro 10000 Photographic Dye Ink
EPSON Stylus Pro 10000 Archival Ink
Before you start, make sure the printer is turned on. Then
follow these steps to replace an ink cartridge:
1. Note the color of the
This is the cartridge that you need to replace.
2. Push the indentation on the ink compartment cover to
release the lock and open the cover.
appears on the control panel display.
light which is on or flashing.
INK COMPART. OPEN