Applied Operations; Set Radar Signal Processing (Process Setting) - JRC JMA-5204 Instruction Manual

3.9

APPLIED OPERATIONS

3.9.1 Set Radar Signal Processing (Process Setting)

This function enables the setting of detail information about radar signal processing.
Procedure 1
Note: After the settings for radar signal processing are
changed, small targets may not be displayed or
unwanted waves may not be suppressed. Thus, do not
make a significant change in the settings.
[1] Video Latitude
Select the dynamic range in which receiving signals are to be shown on the radar display.
Select NORMAL in standard, and WIDE
NARROW clearly displays short-range videos when STC is used in manual mode.
SUPER WIDE :
Press [RADAR MENU] key twice.
Press [6] key.
The Process Setting Menu will appear.
Detail information about radar signal processing
can be set by changing the settings of the menu
items.
NORMAL : Standard setting
The dynamic range varies depending on the actual range:
Short range > long range
WIDE : Use this mode when rainy weather intensifies unwanted waves.
The dynamic range is about twice as wide as when NORMAL is selected.
Use this mode when rain cloud remain at WIDE mode.
The dynamic range is about twice as wide as when NORMAL is selected.
NARROW : Narrows the dynamic range at short range.
in rainy weather.
3 101