Operating The Controls For Tilling - Honda FQ650 Owner's Manual

OPERATING THE CONTROLS FOR TILLING

If the tines dig in but the machine will not move forward, move the handlebars
from side-to-side.
Handlebar Height Adjustment
Stop the engine before adjusting the
handlebar height.
To adjust the handlebar height, loosen
the handlebar height adjuster, select
the appropriate holes and tighten it.
Clutch
When the clutch lever is squeezed, the
clutch is engaged, and power is
transmitted to the transmission.
When the lever is released, the clutch
is disengaged, and power is not
transmitted.
Forward Gear Selection
1. Return the throttle lever to the slowest position.
2. Release the clutch lever to disengage the clutch.
3. Move the gearshift lever to the desired gear position.
The gearshift lever should be operated in accordance with the attached gear
shifting plate.
HANDLEBAR
HANDLEBAR HEIGHT ADJUSTER
CLUTCH LEVER
OPERATION
ENGAGED
DISENGAGED
23