Recoil Starter Cover Check And Cleaning - Honda FQ650 Owner's Manual

SERVICING YOUR TILLER

RECOIL STARTER COVER CHECK AND CLEANING

Check
Make sure that grass, clay, mud water or other similar material is not inside the
recoil starter cover, through the hole located on the side of the cover. Clean if
necessary.
Cleaning
1. Remove the recoil starter cover by removing the bolts.
2. Remove mud, grass tips, dirt and other foreign matter from inside the cover.
3. After cleaning, replace the cover and tighten the bolts securely.
RECOIL STARTER COVER
BOLTS
54