Table of Contents
Advertisement
OPERATION
Tilling Depth Adjustment
The drag bar is used to control the tilling depth.
The tilling depth adjustment can be made as follows:
Remove the lock pin and retainer, loosen the bolts securing the drag bar, and
sliding the drag bar up or down as necessary.
After adjustment, tighten the bolts securely.
Insert the retainer and set the lock pin.
During operation, if the machine jerks forward while tilling, press down on the
handlebars. This will cause the drag bar to dig more deeply into the soil.
LOCK PIN
BOLTS
DRAG BAR
RETAINER
26
Advertisement
Table of Contents
