Operating The Controls For Tilling - Honda F300 Owner's Manual

4MV488000.book 19 ページ ２０１６年３月２日 水曜日 午後１２時３６分

OPERATING THE CONTROLS FOR TILLING

If the tines dig in but the machine will not move forward, move the
handlebars from side-to-side. When turning, push down on the
handlebars to bring the tiller's weight to the rear; this will make turning
easier.
Handlebar Height Adjustment
Before adjusting the handlebar,
stop the engine and place the
tiller on the firm level ground to
prevent the handle from
collapsing accidentally.
1. Loosen the bolt (A).
2. Remove the bolt (B), select the
appropriate hole and reinstall
the bolt (B) securely.
3. Tighten the bolt (A) securely.
Clutch
When the clutch lever is
squeezed, the clutch is engaged
and power is transmitted to the
transmission.
When the lever is released, the
clutch is disengaged and power is
not transmitted.
OPERATION
BOLT (A)
BOLT (B)
CLUTCH LEVER
19