Operating The Controls For Tilling - Honda F220 Owner's Manual

OPERATION
OPERATING THE CONTROLS FOR TILLING
If the tines dig in but the machine will not move forward, move the handlebars
from side-to-side. When turning, push down on the handlebars to bring the
tiller's weight to the rear; this will make turning easier.
Handlebar eight
HANDLEBAR
Stop the engine before adjusting
the handlebar height.
To adjust the handlebar height,
loosen the handlebar height
adjuster, select the appropriate
holes and tighten it.
Clutch
When the main clutch lever is
squeezed, the clutch is engaged,
and power is transmitted to the
transmission.
When the lever is released, the
clutch is disengaged, and power is
not transmitted.
\
MAIN CLUTCH
LEVER
19