Operating The Controls For Tilling - Honda FG400 Owner's Manual

OPERATION
~~ ~~~
OPERATING THE CONTROLS FOR TILLING
If the tines dig in but the machine will not move forward, move the handlebars
from side-to-side. When turning, push down on the handlebars to bring the
tiller's weight to the rear; this will make turning easier.
Handlebar Height Adjustment
111
I
Stop the engine before adjusting
HE
the handlebar height.
To
adjust the handlebar height,
loosen the handlebar height
adjuster, select the appropriate
holes and tighten it.
Clutch
When the main clutch lever is
squeezed, the clutch is engaged,
and power is transmitted to the
transmission.
When the lever is released, the
clutch is disengaged, and power is
not transmitted.
DISENGAGED
CLUTCH LEVER
19