Starting The Stylusrip Server Software Automatically - Epson Stylus Color 3000 User Manual

9. Select your printer from the list. Then confirm the name
and click
OK
Now you're ready to print a PostScript document from the
print server or a client Macintosh. See page 2-8 for instructions.
To make starting StylusRIP easy and to allow you to drag and drop
PostScript files for printing, create an alias of the StylusRIP Server
program on your desktop. Click the StylusRIP Server icon and select
Make Alias from the File menu. Then drag the alias icon to your
desktop. See page 2-12 for instructions on drag and drop printing.
Starting the StylusRIP Server Software
Automatically
Note:
Because the StylusRIP Server software uses a lot of system
resources, you may want to start it automatically only on a print
server that is dedicated to printing PostScript documents.
Follow these steps to set up the StylusRIP Server software so it
starts automatically each time you turn on or restart your
Macintosh:
1. Turn on the printer and the standalone or print server
Macintosh.
2. Click the
StylusRIP Server
3. In the File menu, select
StylusRIP Server Alias
4. Drag the
StylusRIP Server Alias
5. Open the System folder and locate the Startup Items folder.
Printing with the StylusRIP Software
. Close the Chooser when you're done.
icon in the StylusRIP folder.
Make Alias
icon in your StylusRIP folder.
2-7
. The software creates a
icon to your desktop.