Epson Stylus Color 3000 User Manual page 34

See your printer User's Guide for more information about
Media Type and Print Quality settings.
4. Choose one of the settings for reporting
that might occur during printing.
5. Set the
Media/Resolution
media you're printing on and the resolution (print quality)
you want to use. (The
Photo Quality Ink Jet Paper at 720 dpi.) See your printer
User's Guide for more information about Media Type and
Print Quality settings.
6. Set the option to
Ink
.
Grayscale
7. Choose one of the following for the
(for printers with a roll paper option only):
Print Using Roll Feed Media
Make sure you choose this setting when you're printing
on roll paper; otherwise, the printer will eject the entire
roll of paper.
Print Using Cut Sheet Media
default)
Make sure you choose this setting when you're printing
on single sheets of paper; otherwise, the top and
bottom edges of your image may be clipped.
8. Click . When you return to the StylusRIP print dialog
OK
box, click
Print
The application sends the print job to the StylusRIP Server
software for processing and printing.
Printing with the StylusRIP Software
option corresponding to the
Printer's default
(
CMYK Printer's default
.
2-11
PostScript Errors
setting selects
) or
setting
Paper option
(same as Printer's