Installing On A Standalone Or Print Server System - Epson Stylus Color 3000 User Manual

Installing the StylusRIP Software
6. From the Apple menu, open the Chooser and make
AppleTalk active.
7. Close the Chooser and restart your Macintosh.
Now follow the instructions in the next section to install the
StylusRIP software.
Installing on a Standalone or Print Server
System
Before you begin installing the StylusRIP software, check that
the StylusRIP Disk 1 diskette is not write-protected. Do not
copy the diskette; you must use the original in the steps
below.
1. Turn on your printer. Then restart your Macintosh with all
extensions turned off except your CD-ROM drive.
2. Insert the StylusRIP Disk 1 diskette in a diskette drive and
the StylusRIP CD-ROM in a CD-ROM drive.
Note:
Double-click the README icon to read the latest information
on the StylusRIP software and check for any additional
installation steps.
3. Double-click the
4. At the title screen, click
icon in the
Installer
.
Continue
1-4
window.
Disk1