Troubleshooting; Printed Images Are Clipped At The Edges - Epson Stylus Color 3000 User Manual

3
This chapter describes solutions to some problems you may
have with the StylusRIP software. Many problems can be solved
by making sure the printer is turned on and properly connected
to the print server or network before you start the StylusRIP
software, so check these conditions whenever you encounter a
problem.
Here are some detailed solutions to specific problems or error
messages you may receive.

Printed images are clipped at the edges

Possible cause
You are printing a
document with
margins larger than
the printable area of
your printer.
You selected the
wrong printer name
in the Chooser.

Troubleshooting

Solution
Check your printer User's Guide for information on
the maximum printable area on your printer and
format your document so it fits within that area.
Also check that your printer software settings are
correct for the document.
Follow the instructions under "Starting the
StylusRIP Server Software" on page 2-4 and make
sure you select the correct printer icon, AppleTalk
zone, and printer name. Then try printing again.
3-1