Table of Contents
Advertisement
Printing with EPSON Stylus RIP for Macintosh
4. If you have an EPSON Stylus Color 1520 or 3000 printer,
or an EPSON Stylus Photo 1200, 1270, or 2000P, choose
one of the following for the
5. To send the print job to the Stylus RIP Server with the
selected options, click
future default settings, click
Starting the EPSON Stylus RIP
Server Software Automatically
Note:
Because the Stylus RIP Server software uses a lot of system
resources, you may want to start it automatically only on a print
server that is dedicated to printing PostScript documents.
Follow these steps to set up the Stylus RIP Server software so it
starts automatically each time you turn on or restart your
standalone Macintosh or print server:
1. Turn on the printer and the standalone or print server
Macintosh.
2. Click the
to select it.
Print Using Roll Feed Media
Make sure you choose this setting when you're printing
on roll paper; otherwise, the printer will eject the entire
roll of paper.
Print Using Cut Sheet Media
Make sure you choose this setting when you're printing
on single sheets of paper; otherwise, the top and
bottom edges of your image may be clipped.
StylusRIP Server
2-14
Paper Options
(printer's default)
. To make your settings the
Print
Save Settings
icon in the Stylus RIP folder
setting:
.
Advertisement
Table of Contents
