Printing With The Stylusrip Software; Setting Up The Stylusrip Server - Epson Stylus Color 3000 User Manual

2
Once you've installed the StylusRIP software in your
Macintosh computer(s) and printer, you need to set up your
server or standalone system so it's ready to print. Then you can
start printing PostScript documents. Here's what this chapter
covers:
Setting up the StylusRIP Server software
Starting the StylusRIP Server software
Printing from an application
Drag and drop printing
Managing print jobs

Setting Up the StylusRIP Server

Follow the steps below to set up the StylusRIP Server software
the first time you use it. You need to do this for both standalone
and network configurations.
1. Turn on the printer and wait to make sure its
light comes on and the light is not flashing.
Operate
(Check your printer documentation for details.)
2. Turn on the standalone or print server Macintosh.
Printing with the
StylusRIP
2-1
Software
Power
or