Epson Stylus Color 3000 User Manual page 21

Installing the StylusRIP Software
2. Click
3. Make sure your printer model name appears in the
box. If it doesn't appear, click the arrow in the box and
select it from the list. If you're on a network and the printer
has a network interface installed, click
software can find it for you.
4. Select the printer connection. If you connected the printer
via a serial cable, select the printer or modem port. If you
connected the printer to a network card and use AppleTalk
zones, select the zone where it is located.
5. Click
the printer model. If it's correct click
Stop
message telling you to turn off the printer.
. You see the Updater dialog box:
Install
. You see a dialog box asking you to confirm
Update
and check your selections in steps 5 and 6. You see a
1-8
Printer
so the
Net Scan
; if not, click
Install