Printing with the StylusRIP Software
The Timeout, Network Name, and Job Priority settings go into
effect when you click OK and exit the Preferences dialog box.
However, you must exit and restart the StylusRIP Server
software before a change to the Raster Spool Mode setting
can take effect.
8. When you're finished setting up the StylusRIP Server
Starting the StylusRIP Server
When you want to print PostScript documents, you must first
start the StylusRIP Server software. Then you can leave it active
until you turn off your Macintosh.
To set up the StylusRIP Server software so it starts automatically
each time you turn on or restart your Macintosh, see page 2-7.
First turn on your printer and the standalone or print server
Macintosh. Then follow these steps to start the StylusRIP
1. Double-click the
2. Open the Chooser in the Apple menu and make sure
AppleTalk is active, whether or not you are connected to a
In Raster Spool Mode, the StylusRIP Monitor appears
on your screen when you print. See page 2-13 for more
. Then quit the StylusRIP Server.
icon in the StylusRIP