Racelogic VBOX Touch Quick Start Manual page 7

Lap timing mode

Hide thumbs Also See for VBOX Touch:

Table of Contents

Setup

1. VBOX Touch has an internal patch antenna, meaning that in many circumstances, where the unit has a clear view

of the sky without any interference, an additional antenna is not required.

However, if required, mount the supplied external GPS antenna in the centre of the roof of the vehicle, away from

roof bars and other antennas. For more information on antenna mounting positions

Note: The external antenna should be used If you are receiving

unit.

2. If applicable, connect the external GNSS antenna to the VBOX Touch.

3. Connect the Swivel Neck Richter Suction Mount (RLACS277) to the rear of the unit and attach to the vehicle

windscreen.

4. Connect the power via the

5. Insert the SD card into the

as long as the card has free space.

Power

socket.

Side of the

Unit. The

SD Card Icon

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/

click

NTRIP RTK corrections

should display as green

VBOX_Touch_Lap_Timing_Mode_-_Quick_Start_Guide

here.

with a VBOX Touch RTK

Table of Contents

Need help?

Do you have a question about the VBOX Touch and is the answer not in the manual?