Screen Overview - Racelogic VBOX Touch Quick Start Manual

Power
The VBOX Touch unit is either powered by the supplied RLCAB010LE cable (RLVBTOUCH) which is inserted in to a
vehicle's 12 V cigar power socket, or by the RLCAB014LE cable (RLVBTOUCH-M) which is unterminated for making a
bare wire connection to a power supply. More information on this is available here.
Logging
VBOX Touch logs data via an SD card inserted in to the Left Side of the Unit. The unit is supplied with an 8 GB SDHC
card in a FAT32 file format, which is the only file format supported. If you are looking to purchase a new SD card, it is
recommended that any card used has a write speed of above 7 MB/s (4 MB/s absolute minimum) and a speed class of
10 (4 absolute minimum). Racelogic recommend SD cards from quality brands such as Transcend, SanDisk, Kingston
or Lexar to ensure best results.
IMPORTANT – If an SD card is formatted in the exFAT or NTFS file formats, it will need to be reformatted into
a FAT32 file system before it will work with a VBOX Touch unit. More information on this can be found here.

Screen Overview

Main screen example
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/
VBOX_Touch_Lap_Timing_Mode_-_Quick_Start_Guide
6