Racelogic VBOX Touch Quick Start Manual page 11

13. Select which Lap Timing display you would like to be shown
and Back
arrows on the bottom right of the screen or by swiping the screen left or right.
Main screen
14. The unit is now ready to display live Lap Timing values.
Main Screen:
• Once the start/finish line is crossed, VBOX Touch will automatically begin to create a reference lap. When a
reference lap is being created, a 'Creating a Reference Lap' message is displayed within the Delta-T section and
the reference lap section will show a rolling lap time. The LEDs will also illuminate
process. The reference lap will update if a faster lap is achieved unless the
the Settings.
• Once a reference lap has been created, the unit presents a live difference in lap time (Delta-T) between the current
lap time and the stored and active reference lap at the current location on track.
• The 4 LEDs at the top of the screen provide a live reference lap speed comparison (Delta-V), varying in
colour between green
the current location on track. The settings for this can be changed within the
and red dependent on whether you are travelling faster or slower than the reference lap at
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/
(Main or Basic) by selecting the Forward
Basic screen
blue
Reference Lap has been Fixed
Delta-V Range
VBOX_Touch_Lap_Timing_Mode_-_Quick_Start_Guide
during the creation
within
settings.
11