Table of Contents
Advertisement
Connect and pair
Connect to PC
Configure USB adapter
Pair to mobile device
NFC pairing
Your Bluetooth USB adapter comes pre-paired to your headset.
Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC.
1
The USB adapter LED flashes and then turns solid to indicate the headset is connected to
2
the USB adapter. If you are wearing your headset you hear "PC connected" to indicate the
connection has been established. When on a call, the LED on the USB adapter flashes blue.
When not on a call the LED is solid.
Load Poly Lens Desktop App by visiting poly.com/lens. This allows you to customize your
3
headset behavior through advanced settings and options.
Your high-fidelity Bluetooth USB adapter comes ready to take calls. If you want to listen to
music, you will need to configure your Bluetooth USB adapter.
Windows
To configure your Bluetooth USB adapter to play music, go to Start menu > Control Panel
1
> Sound > Playback tab. Select Poly BT700 or Plantronics BT600, set it as the Default
Device and click OK.
To pause music when you place or receive calls, go to Start menu > Control Panel > Sound
2
> Communications tab and select the desired parameter.
Mac
To configure the Bluetooth USB adapter, go to Apple menu > System Preferences > Sound.
1
On both the Input and Output tabs, select Poly BT700 or Plantronics BT600.
To put your headset in pair mode, press the Call button until you hear "pairing" and the
1
headset LEDs flash blue and red.
Activate Bluetooth on your phone and set it to search for new devices.
2
•
iPhone
Settings > Bluetooth > On*
•
Android
Settings > Bluetooth On > Scan for devices*
NOTE
*Menus may vary by device.
Select "Poly V5200 Series."
3
Once successfully paired, you hear "pairing successful" and the headset LEDs stop flashing.
NOTE
Your headset can pair with up to 8 devices but only maintain 2 connections
simultaneously; this includes the Bluetooth adapter.
NOTE
This feature is available on select models
10
Advertisement
Table of Contents
