Connect And Pair; Connect To Pc; Configure For Media; Pair To Mobile Device - Poly Voyager 5200 UC User Manual

Connect and pair

Connect to PC

Configure for media

Pair to mobile device

Your Bluetooth USB adapter comes pre-paired to your headset.
Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC.
1
The USB adapter LED flashes and then turns solid to indicate the headset is connected to the USB
2
adapter. If you are wearing your headset you hear "PC connected" to indicate the connection has
been established. When on a call, the LED on the USB adapter flashes blue. When not on a call the
LED is solid.
OPTIONAL Load Plantronics Hub for Windows/Mac by visiting poly.com/software. This allows you
3
to customize your headset behavior through advanced settings and options.
Your USB Bluetooth adapter comes ready to take calls, but listening to music takes some
additional configuration.
Windows
To configure your Bluetooth USB adapter to play music, go to Start menu > Control Panel > Sound
1
> Playback tab. Select Plantronics BT600,
To pause music when you place or receive calls, go to Start menu > Control Panel > Sound >
2
Communications tab and select the desired parameter.
Mac
To configure the Bluetooth USB adapter, go to Apple menu > System Preferences > Sound. On
1
both the Input and Output tabs, select
To put your headset in pair mode, press and hold the Call button until you hear "pairing" and the
1
headset LEDs flash red and blue.
Activate Bluetooth on your phone and set it to search for new devices.
2
• iPhone Settings > Bluetooth > On*
• Android Settings > Bluetooth: On > Scan for devices*
NOTE
*Menus may vary by device.
Select "PLT V5200 Series."
3
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear "pairing successful" and the headset LEDs stop flashing.
NOTE Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously;
this includes the Plantronics Bluetooth USB adapter as one of the 2 simultaneously connected devices.
set it as the Default Device and click OK.
Plantronics BT600.
10