Pair Usb Adapter Again - Poly Voyager 5200 UC User Manual

NFC pairing is an option if you have no more than one other device already connected.
NFC pairing will not work if there are two devices connected already.
On your mobile phone ensure NFC is enabled and your phone's display is unlocked.
1
(Phones may vary and some phones may not have NFC support.)
With the headset powered on, lay the headset on the back of phone near the NFC tag on
2
phone as shown until NFC pairing completes. If necessary, accept the connection.
Pair USB adapter Typically, your USB adapter is pre-paired to your Poly audio device. In the event that your
adapter is disconnected or bought separately, you will need to pair the adapter to your Poly
again
device. The adapter pairing method depends on which USB adapter you use.
Pair BT700 USB adapter again
Your USB adapter requires Poly Lens Desktop App to pair to a Poly audio device.
Download: poly.com/lens.
BT700 USB-C
Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for
1
your computer to recognize it.
Put your Poly audio device in pair mode.
2
Launch Poly Lens Desktop App and navigate to Poly BT700.
3
Put your Bluetooth USB adapter into pair mode by selecting "Pair new device" on the
4
adapter's main page or overflow menu. Your adapter flashes red and blue.
Pairing is successful when you hear "pairing successful" and "PC connected" and the
Bluetooth USB adapter LED is solid.
NOTE
general settings and select "Pair."
Pair BT600 USB adapter again
BT700 USB-A
To pair again using Plantronics Hub Desktop App, navigate to the app's Poly BT700
BT600 USB-C BT600 USB-A
11