Safety Instructions For Installation And Maintenance Work; Unauthorised Modification And Manufacture Of Spare Parts; Improper Use; Transport And Interim Storage - Wilo -Zeox FIRST Installation And Operating Instructions Manual

2.6 Safety instructions for installation and maintenance work

The operator must ensure that all installation and maintenance work is carried out by
authorised and qualified personnel, who are sufficiently informed from their own detailed
study of the operating instructions.
Work on the product/unit must only be carried out when at a standstill. It is mandatory
that the procedure described in the installation and operating instructions for shutting
down the product/unit be complied with.
Immediately on conclusion of the work, all safety and protective devices must be put back
in position and/or recommissioned.

2.7 Unauthorised modification and manufacture of spare parts

Unauthorised modification and manufacture of spare parts will impair the safety of the
product/personnel and will make void the manufacturer's declarations regarding safety.
Modifications to the product are only permissible after consultation with the manufac-
turer. Original spare parts and accessories authorised by the manufacturer ensure safety.
The use of other parts will absolve us of liability for consequential events.

2.8 Improper use

The operating safety of the supplied product is only guaranteed for conventional use in
accordance with Section 4 of the operating instructions. The limit values must on no
account fall under or exceed those specified in the catalogue/data sheet.

3 Transport and interim storage

When receiving the material, check that there has been no damage during the transport.
If shipping damage has occurred, take all necessary steps with the carrier within the
allowed time.
DANGER! Risk of death!
To reduce risks during lifting and handling operations, be sure to operate in security
conditions checking that equipments are complying with safety rules and suitable for
the weight, dimensions and shape of the pump. Handle the pump with protective
gloves avoiding hand injuries.
Only suitable lifting gear and load carrying equipment with valid test certificates and ade-
quate lifting capacity for the loads involved (such as belts/wire ropes/slings) should be
used for lifting & transporting the product. If chains are used, they should be secured
against slipping along with protective cover to prevent damage to the product, paint and/
or injury to personnel.
Before handling and lifting check:
• Weight of the pump (reported on the plate)
• The lifting hook position
CAUTION! Risk of damage to the pump! Risk of falling!
Always take the weight and centre of gravity into consideration.
Never use the motor eye bolts when slinging assembled pump sets.
Never put down or pick up the product when it is not secured.
Examples of correctly handling the pump: see fig.1
Installation and operating instructions Wilo-Zeox FIRST
English
23