Table of Contents
Advertisement
SuperServer 4029GP-TVRT User's Manual
1.4 Server Chassis Features
Control Panel
The switches and indicator lights located on the control panel are described below.
Item
Feature
1
BMC reset/UID Button
System Reset Button/
2
Information LED
3
Power Button
Status
Continuously on and
red
Blinking red (1Hz)
Solid blue
Blinking blue
1
2
Figure 1-1. Control Panel View
Control Panel Features
Description
This button is dual function, depending on the JBMC_BTN jumper (see
Chapter 4). It either:
– Resets the Baseboard Management controller (BMC) that provides
IPMI support.
– Turns on or off the blue unit identifier (UID) light, used to locate the
server in large server banks.
The reset button is used to reboot the server. The LED indicator in the
button alerts an operator to several states, as noted in the table below
The main power switch applies or removes primary power to the
server; standby power is maintained. It is green when the system is
operating. It is amber when the system is off, but the power supplies
are still connected and providing standby power.
Information LED
Description
An overheat condition has occurred.
(This may be caused by cable congestion.)
Fan failure; check for an inoperative fan.
UID has been activated locally to locate the
server in a rack environment.
UID has been activated using IPMI to locate the
server in a rack environment.
10
3
Advertisement
Table of Contents
