Table of Contents
Advertisement
Expansion Cards
The X11DGO-T system motherboard offers two PCI-E expansion card slots. See restrictions
if the system includes NVMe (Storage Drives section). The X10DGO-SXMV GPU board offers
four additional PCI-E slots, supported by PLX, linked to the GPUs. All expansion cards are
x16 low profile.
Installing Expansion Cards
1. Power down the system as described in Section 3.1.
2. Slide out the chassis motherboard tray or GPU tray and remove the cover, Section 3.2.
3. Remove the screw holding the blank PCI shield in the front of the tray.
4. Insert the expansion card into the board slot, while aligning the expansion card shield
with the slot in the front of the tray.
5. Secure expansion card shield to the chassis using the screw.
Figure 3-13. Expansion Cards on Motherboard (supported by CPUs)
Chapter 3: Maintenance and Component Installation
Expansion Cards (2)
55
Advertisement
Table of Contents
