Table of Contents
Advertisement
2-3 Procedure for Rack Mounting
This section provides information on installing the chassis into a rack unit with the rails
provided. There are a variety of rack units on the market, so the assembly procedure may
differ slightly. Also refer to the installation instructions for your rack unit.
Note: This rail will fit a rack between 28" and 33.5" deep.
Overview of the Rack Rails
The package includes two rail assemblies. Each is specifically designed for the left or right
side of the chassis, and so marked. Each rail consists of two sections: a front section which
secures to the front post of the rack and a rear section which adjusts in length and secures
to the rear post of the rack.
Front Section
This Side Faces
Outward
Adjusting the Rails
Each rail assembly has an adjusting screw. Loosen this screw to adjust the length of the rail
to fit the depth of your rack.
Figure 2-1. Rackmount Rail
(Left Rail assembly shown)
21
Chapter 2: Server Installation
Rear Section
Adjusting Screw
Advertisement
Table of Contents
