Preventive Maintenance; Daily Cleanup - Kodak X-Omat M43 Operator's Manual

Preventive Maintenance

Daily Cleanup

[1] Turn off the processor by moving the Main Circuit Breaker CB1 to the "O" position.
[2] Turn off the main power to the processor.
Note
To avoid getting debris in the processor, do not use a sponge to clean any processor parts.
[3] Wipe the following parts using warm water and a clean, damp, lint-free cloth:
• Feed Tray
• Top Cover
• Front, Back, and Side Access Panels
981089 – September 1995
Preventive Maintenance
25