Shutdown - Kodak X-Omat M43 Operator's Manual

OPERATOR MANUAL

Shutdown

[1] Turn off the processor by moving the Main Circuit Breaker CB1 on the processor to the "O" position.
[2] Turn off the main power to the processor.
[3] Turn off the water supply to the processor.
[4] In Low Water Usage Mode, open the Wash Drain Valve by rotating it
Note
With Modification No. 2, Part No. 8B6930, installed, the processor will drain automatically overnight.
[5] Do the "Daily Cleanup" procedure on Page 25.
Figure 16 Shutting Down the Processor
Main
Circuit
Breaker
CB1
24
1
/ turn.
4
Wash Drain Valve
September 1995 – 981089
H130_0019BCK
H130_0019BA