Table of Contents
Advertisement
Chapter 3: Local Management
3.10.5 Setting the Interpret 802.3 Length Field to
[ENABLED]
To enable the Interpret 802.3 length for frames > 64 bytes, perform the
following steps:
1. Use the arrow keys to highlight the Interpret 802.3 length for frames
> 64 bytes field.
2. Use the SPACE bar to toggle the choices until [ENABLED] displays.
3. Use the arrow keys to highlight the SAVE command located at the
bottom of the screen.
4. Press ENTER. The configuration changes are saved to memory.
To disable the Interpret 802.3 length for frames > 64 bytes field, perform
the steps above while using the SPACE bar to toggle the options until
[DISABLED] displays.
3-34
DELHF-UA User's Guide
Advertisement
Table of Contents
