Ring Map Configuration Screen Fields - Cabletron Systems DELHF-UA User Manual

Digital fddi modular interface
Table of Contents

Advertisement

Chapter 3: Local Management
Device Name: DLE32-MA
Slot Number: X
FDDI Address: 00:00: B8: 08: F9: C4
Current Ring Map: Primary
00: 00: B8: 08: F9: C4 (DAS) <<<<<<<<<<<<<<<<<<<<
00: 00: B8: 08: F9: FA (DAC) >>>>>>>>>>>>>>>>>>>>
SCROLL DOWN 1
Figure 3-11 The Ring Map Configuration Screen
Under some conditions the display must remain on the screen
for at least 30 seconds to accurately reflect ring configuration.
A neighbor time-out can take as long as 228 seconds to update
on the ring map.
3.7.1

Ring Map Configuration Screen Fields

The Ring Map Configuration screen displays the addresses and sequence
of each FDDI device attached to the ring. When first displayed, the station
at the upper left corner of the ring is this station (DELHF-UA). The Ring
Map Configuration screen displays node class, node address, and twisted
and/or wrapped conditions (T for twisted and/or W for wrapped) in
parentheses. The following list provides the node class possibilities:
(Null Attached Station) Isolated station; station not connected to
NAS -
an FDDI Ring.
(Dual Attached Station) Station does not support M (Master)
DAS -
ports, but does connect directly to an FDDI primary and secondary ring
using A and B ports.
3-18
Flash Image Revision: XX.XX.XX
BOOTPROM Revision: XX.XX.XX
Ring Map Configuration
SCROLL UP 1
MAC Count: 3
Address Mode: [MAC]
(DAS) 00: 00: B8: 08: DB: 11
EXIT
RETURN
DELHF-UA User's Guide
209141

Advertisement

Table of Contents
loading

Table of Contents